How to Put Kitchen Cabinet Handles on: A DIY Guide
Adding new handles to your kitchen cabinet doors and drawers can give your kitchen a fresh and updated look. It is a simple and cost-effective way to transform the overall appearance of your kitchen. In this article, we will guide you through the step-by-step process of putting kitchen cabinet handles on.
Credit: truepositiontools.com
What You Will Need
Before you begin, make sure you have the following tools and materials:
- Screwdriver
- Measuring tape
- Drill
- Handles
- Pencil
- Level
- Masking tape
Credit: www.homedepot.com
Step 1: Measure and Mark
Start by measuring the height of your cabinet doors and drawers. This will help you determine the ideal placement for your handles. Use a measuring tape to get accurate measurements.
Once you have the measurements, mark the desired position for the handles using a pencil. Make sure the marks are level and evenly spaced. You can use a level to ensure accuracy.
Step 2: Pre-drill Holes
Using a drill, create pilot holes for the handles. The size of the drill bit should match the diameter of the screws that came with your handles. Pre-drilling the holes will make it easier to attach the handles securely.
Step 3: Attach the Handles
Take the handles and align them with the pre-drilled holes. Insert the screws through the holes in the handles and tighten them using a screwdriver. Make sure the handles are securely attached to the cabinet doors and drawers.
Step 4: Check for Levelness
Once all the handles are attached, use a level to check if they are level. This is important to ensure a uniform and professional look. Adjust the handles if necessary.
Step 5: Secure with Masking Tape
To prevent the handles from moving while you tighten the screws, you can use masking tape. Simply place a small piece of masking tape over the screw holes on the inside of the cabinet doors and drawers. This will help keep the handles in place and make the installation process easier.
Step 6: Clean Up
After you have successfully installed all the handles, remove the masking tape and clean up any debris. Use a damp cloth to wipe down the cabinet doors and drawers to ensure a polished finish.
Tips and Considerations
Here are a few additional tips and considerations to keep in mind when putting kitchen cabinet handles on:
- Make sure to choose handles that complement your kitchen’s style and decor.
- Consider the size and weight of the handles to ensure they are suitable for your cabinet doors and drawers.
- If you are replacing old handles, fill any existing holes with wood filler and sand them down before installing the new handles.
- Take your time to ensure accurate measurements and proper alignment.
- Consider enlisting the help of a friend or family member for a smoother installation process.
Frequently Asked Questions
How Do I Choose The Right Cabinet Handles?
To choose the right cabinet handles, consider the style, size, material, and finish that complement your kitchen design.
What Tools Do I Need To Install Cabinet Handles?
You will need a measuring tape, pencil, drill, screwdriver, and a template for accurate installation of cabinet handles.
Can I Install Cabinet Handles Without Professional Help?
Yes, you can easily install cabinet handles yourself with the right tools and following the proper installation steps.
What Is The Standard Height For Cabinet Handles?
The standard height for cabinet handles is typically 2. 5 to 3 inches from the bottom of the upper cabinet door.
Conclusion
Putting kitchen cabinet handles on is a relatively simple and rewarding DIY project. By following these steps, you can easily update the look of your kitchen cabinets and drawers. Remember to take your time, measure accurately, and choose handles that suit your kitchen’s style. Enjoy your newly transformed kitchen!
